Hydraulic accesories

Safety valve (hydraulic lock  with manual control) is designed to hold the load by hydraulic cylinder, automatically locks the cylinder working cavity after the loading, causing the hydraulic cylinder be under load for a long time without inadvert

Hydraulic lock with hydraulic control is designed to hold the load by hydraulic cylinder, automatically locks the cylinder working cavity after the loading, causing the hydraulic cylinder be under load for a long time without inadvertent movement.

Saddles are set on the cylinder stroke, protecting it from damage.

Designed to create a solid base surface and to provide steadiness of the cylinder at its operation.

Multi-stage valves are designed to provide simultaneous operation of multiple hydraulic equipment (such as one-way lift cylinders) by means of connection to a single pressure source.

Directional control valves are designed to control actuators by redirecting the flow of working fluid

External safety valve is meant for throttling the hydraulic fluid by partial discharging to the outlet drain in case of exceeding the set pressure value, effectively adjusting the flow rate and pressure in the pipeline.

External relief valve is meant for throttling the hydraulic fluid by partial discharging into the tank, effectively adjusting the flow rate and pressure in the pipeline.

External control safety valve is meant for throttling the hydraulic fluid by partial discharging to the outlet drain in case of exceeding the set pressure value, effectively adjusting the flow rate and pressure in the pipeline.

Indicators and gauges are meant to inform the user about the state of the pump, its pressure, level and temperature of the hydraulic fluid in the tank.

These adapters are designed for installation of gauges in in any convenient place of the hydraulic system lines.

Designed for assembly of hydraulic systems, connection of hydraulic actuators and hydraulic equipment to each other, to remote locking and distribution elements, pumps.

These couplers are designed for quick connection of hydraulic equipment with each other, pumps.

.

Angle fittings, plugs; straight couplings, tees, crosses

The safety valve is designed to reset the working fluid to drain when excess pressure above the setting

Designed for installed at pumps and connected control equipment and tools.

Air preparation equipment meant for installation at NPR pump with pneumatic engines.

Oil coolers are designed to cool the working fluid being drained into the tank.

Electrical accessories for pumps can be applied to any standard pump.

Additional tanks are designed to increase the amount of hydraulic fluid in the system.

Pump tank can be equipped with a safety cage and wheels for easy movement.

Adjusting safety valves are designed to discharge the working fluid to the drain when the pressure is above the setting

They are used to control the hydraulic flow of the working fluid. Used for hydraulic cylinders/single-acting tools.

They are used to control the hydraulic flow of the working fluid. Used for hydraulic cylinders/single-acting tools.

They are used to control the hydraulic flow of the working fluid. Used for hydraulic cylinders/single-acting tools.

They are used to control the hydraulic flow of the working fluid. Used for hydraulic cylinders/single-acting tools.

They are used to control the hydraulic flow of the working fluid. Used for hydraulic cylinders/single-acting tools.

They are used to control the hydraulic flow of the working fluid. Used for hydraulic cylinders/single-acting tools.

They are used to control the hydraulic flow of the working fluid. Used for hydraulic cylinders/single-acting tools.

They are used to control the hydraulic flow of the working fluid. Used for hydraulic cylinders/single-acting tools.

They are used to control the hydraulic flow of the working fluid. Used for hydraulic cylinders/single-acting tools.

They are used to control the hydraulic flow of the working fluid. Used for hydraulic cylinders/single-acting tools.